​Floor Care in 3 Easy Steps:

1.Vacuum

Vacuum, dry mop or sweep to remove any loose dirt or grit. The best method of removing dirt and grit is vacuuming with a soft brush attachment on your vacuum. If using the Bona Microfiber mop to dry mop, remove any loose dirt or grit after dry-mopping by rinsing with water and wringing out the mop pad prior to cleaning floor with Bona Pro Series Hardwood Floor Cleaner.

---

2. Spray

Lightly mist a 4' x 6' area of your floor or directly mist the cleaning pad with Bona Pro Series Hardwood Floor Cleaner.

---

​3. Clean

Using a slightly dampened, well wrung-out Bona Microfiber cleaning pad, thoroughly clean the floor surface using your Bona Microfiber Mop. Finish one area before moving on to the next. When your mop pad becomes soiled, rinse with water, thoroughly wring out the pad and continue cleaning with Bona Pro Series Hardwood Floor Cleaner. When the mop pad becomes excessively soiled, launder and replace with another clean mop pad. Continued use of excessively soiled pads may cause streaking.
Your Bona Microfiber cleaning pads are reusable and washable. Do not use any fabric softeners, dryer sheets, or bleach on your Microfiber Cleaning Pad as these products will diminish the natural cleaning characteristics of the Microfiber. When a spill occurs, soak up the liquid right away. Mist the area with cleaner, and wipe with your Bona Microfiber Mop or a Microfiber Floor Cloth.

---

​Screen and Recoat

​If you are using the recommended cleaner, we suggest that your hardwood floors be buffed/screened and recoated to keep them looking good and help extend the life of the floor. Applying another coat of urethane delays the need for a complete sand & refinish, which in turn will save you a significant amount of time and money. Kitchen floors or high traffic areas should be recoated every 1-2 years.